Professional Jinbei BM-395 light stand with manual lift. The three-section central column of the tripod is pulled out using two hand lifts. The safety of lowering the equipment is ensured by locker holes on the column thanks to which the lowering and lifting mechanism blocks its movement. The hand lift mechanism is equipped with a large disassembled crank, whose rotation speed can be adjusted with a screw.
The central column of the light stand is made of stainless steel and divided into three parts with diameters of 60/50/40 mm. The use of such large diameters allows the assembly of large boom arms, or several lamps at a time. The last section of the column was crowned with a 29mm spindle mounting. Assembly of lamps and booms is possible thanks to the universal end of the shaft with a diameter of 16 mm.
The support for the Jinbei BM-395 consists of three steel legs with a square profile 30x30 mm. One of them can be extended by 20 cm, which allows you to work on uneven ground or a small increase. To ensure greater stability, the legs are connected by a screw-locking spacer. Free use of a tripod in the studio is ensured by wheels with a diameter of 150 mm. Each wheel has a braker to block of movement and rotation. The rubber finish dampens vibrations caused by moving the tripod on the ground.
The tripod is ideally suited for film productions or advertising photography. Its lifting capacity (50 kg) allows for mounting large lamps with a fresnel lens, or a few smaller ones at once. Except that, even large booms can be mounted on it.
Specs:
Set includes:
Max height | 4050 mm |
Min haight | 1625 mm |
Sections | 2 |
Leg diameter | przekrój kwadratowy 30x30 mm |
Folded length | 2100 mm |
Capacity | 50 kg |
Weight | 34 kg |
Add your opinion >
No opinions - be first.
Professional Jinbei BM-395 light stand with manual lift. The two-section central column of the tripod is pulled out using two hand lifts.
Weight: 34 kg
Max safety payload: 50 kg
Max height: 4050 mm
Min height: 1625 mm
... Czytaj więcej