YN200 is the first such efficient Yongnuo battery flash. This compact device offers 200 Ws (GN 60) power, fast charging system (2 seconds at full power flash), as well as three flash modes: M / Multi / TTL. The lamp is powered by a 2900 mAh lithium-ion battery, while the 560-TX Pro hybrid system is responsible for wireless communication.

Unlike classic speedlights, the YN200 does not have a hot shoe, and the flash tube is convex and round - just like in studio lamps. The slim and compact housing means that the device will fit in any medium-sized bag, and using it outdoors will not be a problem. The lamp body has a large cut-out for a lithium-ion battery, as well as two sockets (on the side and bottom) with 1/4" thread for mounting the lamp on a tripod. In addition, on the sides of the lamp there are: a lamp power switch and a 3.5 mm synchro socket. A convenient LCD display, located on the back of the device next to the control panel.

Thanks to the special plug, the 200Ws flash tube can be quickly disassembled and reassembled. This will help protect against accidental breakage of the flash tube, e.g. when traveling. The lamp offers power adjustment in the range of 1/1 ~ 1/64 every 1/3 step. The fast charging system allows you to achieve a charging time of up to 0.01 s. The device works in three flash modes: manual, multi and TTL, also allows you to synchronize the flash in the range to 1/8000 s.

Wireless communication with the YN200 lamp is possible in two ways. The first is based on proven 2.4GHz radio communication (16 channels, 6 groups) and supports the reception of signals from YN560-TX Pro, YN560-TX (II), RF605, RF603 (II), YN862, YN560 IV, YN660 and YN720 devices. The second one works by means of an optical signal in the Nikon and Canon triggering system, and in photocell mode.

YN200 is powered by a lithium-ion battery with a capacity of 2900 mAh - its specification allows you to release about 500 flashes at full power. Charging the power source is possible with a dedicated charger, which is included in the set with the lamp. The USB / USB-C cable attached to the charger gives you the option of recharging the battery using a power bank or classic from a USB charger.

In addition, in the box with the lamp there is also a dedicated 12 cm reflector with a diffusion filter.

Specs:

• Flash output: 200W
• Guide No: 60 @ ISO100 (using the reflector)
• Color temperature: 5600K
• Power supply: 14.4V 2900mAh lithium battery
• Recycle time: About 0.01-2 s
• Power Adjustment: 1/1~1/64
• Full power flashes: About 500
• Trigger mode: Radio slave mode (YN560), advanced optical (SC/SN), S1, S2
• Flash mode: TTL, M, Multi
• Synchronous interfaces: 3.5 mm
• Upgrade interface: Micro -USB
• Dimensions：About 205 x 78 x 53mm (without flash tube)
• Weight: About 540g (without battery & flash tube)
• Contains items: YN200 speedlite, 200W Flash tube, YN-B2900 Li-ion battery, YN-C2900 charger, charging cable