Home / Speedlights / Reporter's kits / Strobist Kit Yongnuo 968 Nikon II with YN622-TX radio trigger
Product description

Yongnuo strobist proposal for Nikon system users. The set consists of an advanced speedlight Yongnuo 968 and a trigger 622-TX. Communication between devices is based on the Yongnuo 622 system, which allows you to work in HSS and TTL modes. Both modes can be used both in outdoor conditions (when lighting conditions are very variable), and also when working in rooms (eg, in wedding halls, when time counts and creative lighting). The set offers the possibility of expanding with further lamps (eg Yongnuo 685, Yongnuo 968) without the need to buy additional receivers.

 

The source of the flash in the set is the speedlight Yongnuo 968 in the Nikon version. The lamp has a built-in receiver allowing radio communication with the camera in the Yongnuo YN622 and YN560 system. The characteristic feature of the YN986N is the head, equipped with two light sources: a flash tube and a panel with LED matrix. The lamp generates a flash with the guide number GN 60 (ISO 100, 105mm). High power combined with short charging times guarantees immediate readiness to act at any time. In unfavorable lighting conditions, the LED panel comes in handy to facilitate the focusing and correct framing of the scene. The Yongnuo lamp has been equipped with the HSS (high speed) synchronization mode (up to 1/8000 s) and the TTL flash power selection automation system, extremely useful functions in changing lighting conditions. The built-in radio receiver enables wireless communication in the Yongnuo YN622 and YN560 system. YN968N can be used as a "master" unit to control other YN968N, YN685 lamps and YN622N, YN622N II triggers. In "slave" mode, YN968N can receive radio signal from other YN968N lamps and triggers YN622N, YN622N II, YN622N-TX, YN560-TX, RF605, RF-603. YN986N can also be used in the optical flash control system. In the "slave" mode the lamp can receive optical signals from Yongnuo YN568EX II, Canon 580EX II, Nikon SB-700, SB-800, SB-900, SB-910 and built-in Canon camera lights (600D, 60D, 7D) and Nikon .

 

The trigger included in the kit is the Yongnuo 622-TX operating in the Nikon system. The trigger supports flash units equipped with i-TTL. Remotely controls the flash output of the lamps in the group, exposure compensation, or zoom of the speedlights in the group. It can be mounted directly on the foot of the camera or connected via a synchro cable. Thanks to radio communication on the 2.4 GHz frequency, the working range can be up to 100 meters. A large backlit LCD display makes operation much easier. Work on one of 7 transmission channels, support for 3 work groups. The trigger automatically remembers the last user settings.

 

Main features

  • The set is fully compatible to work in i-TTL mode - the advantages of this mode will certainly be appreciated by the photographer at wedding halls or in the open air under variable lighting conditions.
  • It is possible to add a lamp working in Yongnuo wireless communication mode.
  • The lamp works in Master and Slave modes which increases the possibility of expanding the set.
  • The devices in the set do not require mains power, which allows you to work outdoors or in places with limited access to electricity.

Yongnuo 968 II specs:

  • guide number (GN): 60
  • zoom: 20 - 200 mm
  • recharge time: 3s
  • flash output adjusting: 1/128 - 1/1
  • color temperature: 5600K
  • LED light 5500K (300lx)
  • work modes: Manual, TTL, MULTI (stroboscopic)
  • first and second curtain synchronization, HSS
  • Master and Slave in Radio transmission and Optical transmission
  • base frequency: 2.4GHz
  • 7 channels, 3 groups
  • supports full frame and APS-C cameras
  • flash head rotating: vertical: -7° to 150°; horizontal: 0° to 180°
  • built in diffuser and deflector
  • PC socket, battery pack socket
  • beeper
  • power supply: 4 x AA/R6 battery or Ni-MH battery; battery pack
  • flash number: 100-1500, on new AA bateries
  • wireless work range: to 100 m (radio); 10-25 m (optical)
  • dimmensions: 7,8 x 6,1 x 21,4 cm
  • Weight: 435g (without batteries)
  • metal hot shoe
Technical data
Our customers reviews Click and see them

Add your opinion >

No opinions - be first.

Yongnuo
Strobist Kit
Yongnuo 968 Nikon II with YN622-TX radio trigger
Product code: ZES-YN968622
Availability: Out of stock / Warranty: 2 years

Yongnuo strobist proposal for Nikon system users. The set consists of an advanced speedlight Yongnuo 968 and a trigger 622-TX. Communication between devices is based on the Yongnuo 622 system, which allows you to work in HSS and TTL modes.

... Czytaj więcej
Cena:249.00 €
zamiast: 262.00 € (oszczędzasz: 13 €)
Out of stock
Notify about product availability >
Items you may like
Other products from this brand
Add to cart +