The strobist kit consist of two speedlights YongNuo YN-560 III and controller YN560-TX. The lamp has built in receiver YN-560TX and can triggered by RF-602/603/605 triggers and YN560-TX. The YN560-TX controller allows for fully control of YN560 III and 560 IV speedlights. It can be remotely controlled by triggers RF-602/603/605 and at the same time it can control YN560 III and YN560 IV speedlights and camera shutter. The YN560-TX can control also other speedlights in manual mode (triggering only), with triggers RF-602/603/605. It is available in two versions, for Canon and Nikon.
Features of YN560 III speedlight:
- can work as Master controller - supports 3 groups
- built-in receiver of RF-602 and RF-603 (I,II)
- guide number GN 58
- wide zoom range 24-105mm
- 2 work modes of photocell (S1 and S2)
- large backlighted LCD
- battery pack socket, compatible with CP-E3, CP-E4
Features of YN560-TX:
- Full remote control of YongNuo 560III and 560IV
- Supports 6 groups (A/B/C/D/E/F).
- The YN560-TX can be remotely triggered by YN RF603/RF603II and then it relased lamps in scene and camera shutter.
- Supports MULTI and Manual modes. Flash output adjusting range 1/1~1/128.
- Large readable LCD display.
- It can also triggers other lamps via RF-603/603II. In this case remote control of flash parameters is not possible.
The kit includes:
- 2x speedlight YN-560 III
- 1x controller YN-560TX for Nikon
- 2x cover
- 2x mini stand with socket 1/4"
- user manual
Specification of speedlight:
- remote radio triggering, compatible with transmitters RF-602 and RF-603
- works with full frame cameras as well as with non-full frame
- effective range: 25 m indoor, 15 m outdoor (photocell), and 100m (radio)
- color temperature: 5600
- flash duration: 1/800s - 1/20000s
- power regulation: 8 levels - Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
- work modes: M – manual, S1, S2 - photocell triggering (S2 omits pre-flashes), RX - radio triggering
- MULTI mode
- large LCD display
- reflector and diffuser board
- guide number: GN58
- a group of modeling flashes (previewable)
- number of flashes: 100-1500, with new alkaline AA batteries
- recharge time: up to 3s
- battery pack socket
- head position adjusting: X axis: -7° to 90°; Z axis: 0° to 270°
- power supply: 4x R6/AA batteries / rechargeable Ni-MH batteries
- auto power saving modes
- sound prompting system
- dimensions: 60*190*78 mm
- weight: 350 g (without batteries)
- metal shoe
- set includes: flash, base with 1/4" thread, cover, user's guide
Specification of trigger:
- compatible with Nikon
- modes: Manual / Stroboscopic
- shutter remote control (with RF-603 / RF-603II)
- base frequency: 2,4Ghz
- range: 100m
- supports 6 groups
- channels: 16
- flash output adjusting: 1/1~1/128 (with step 1/3)
- battery life in standby mode: 120h
- Zoom adjusting range: 24-105mm
- synchro socket: 2,5mm
- power supply: 2xAA/R6
- dimmensions: 70 x 97,5 x 43 mm
- weight: 98g
Attention. This product will not work with cameras without a central pin in the hot shoe slot (eg Canon EOS 2000D, 3000D, 4000D).