Compact but solid BC-700 process charger BC-700 of very high product quality, professional functions and intuitive interface.

BC-700 is a process charger with LCD display, dedicated for charging Ni-Cd and Ni-Mh R6/AA lub R03/AAA rechargeable batteries. It can also discharge, refresh and test the capacity of the batteries.

It has four mutually independent channels so the batteries of different size and capacity can be charged, discharged, refreshed and tested at the same time.

The display shows information about each channel:

• input
• output
• charging time
• charge accumulated

Different output can be set for each channel:

• 200 mA for AA and AAA
• 500 mA for AA and AAA
• 700 mA for AA and AAA

Different working mode can be set for each channel:

• charging
• discharging
• refreshing (formatting)
• testing (capacity test)

Working modes:

Charging

charging of NiCd and NiMH batteries
charging of AA (R6) and AAA (R03) sized batteries
output can be set to 200/500/700 mA
each battery managed individually
automatic switching to sustaining charging mode
minus delta V (-dV) function detecting full charge
temperature control

Discharging

Discharging preventing from memory effect
output can be set to 100/250/350 mA
automatic switching to charging at 2 times higher output

Refreshing/formatting

This function makes the new batteries reach their maximum capacity and the old ones improve theirs. It is based on charging and discharging the batteries several times until the capacity stops growing.

Testing

The battery's capacity is tested by discharging and then fully charging it. The real capacity of the newly bought batteries can be checked this way.

Technical features:

• supported rechargeable batteries: NiCd / NiMH
• supported rechargeable batteries size: AAA (LR03), AA (LR06)
• AA and AAA batteries can be charged at the same time
• overheating and overcharging sensor
• minus delta (-dV) function detecting the end of charging process
• the function of recognizing damaged batteries
• input: 100 - 240 VAC
• output: 200 mA, 500 mA, 700 mA
• maximum charging capacity (battery's capacity): 3000 mAh
• number of batteries charged: up to 4 (independently)
• four working modes: charging, discharging, refreshing, capacity testing
• discharging mode helping to avoid the memory effect
• refreshing function based on continuous discharging and charging again. The process restores the battery's optimum capacity
• testing function to control the batteries' real capacity
• charging/discharging function can be run independently on separate channels at the same time
• LCD display
• while charging/discharging, the LCD display can show input, output, charging time and the battery's current charge
• three function keys and four numeric keys
• charging sustainig function
• information about the end of charging
• charger size: 75 x 129 x 37,2 mm
• warranty: 24 months

Package contains:

• battery charger
• AC device
• user's guide