info@fripers.ie
mon-fri 8:30- 16:30
mon-fri 8:30- 16:30
YN32-TX is a transmitter designed to work with Yongnuo receivers and lamps. The device allows you to control the lamps in five groups in M / Multi / TTL modes. In addition, YN32-TX supports synchronization in HSS mode and Gr management mode to help manage several groups of lamps at the same time. The transmitter is dedicated to Sony cameras.
The design of the device is compact and compact. The front of the YN32-TX transmitter is divided into two parts - the control panel and the LCD screen. On the right side (looking from the user's side) there is a USB-C power socket, and on the opposite side there is a power switch. On the edge from the user's side, a setting knob is used. The bottom of the transmitter is finished with a foot dedicated to work with the Sony system (Multi Intefrace).
The YN32-TX trigger is powered by a built-in 3.7V battery with a capacity of 350mAh. The device is charged using a dedicated USB-C socket. At the same time, the socket is used to update the device software.
Specs:
| Radiowa | |
| Frequency | 2.4GHz |
| Range | ok. 60m |
| Number of channels | 16 |
| TAK | |
| 5 | |
| Sony (Multi Interface) | |
| NIE | |
| TTL / M / Multi | |
| TAK | |
| YN200, YN860Li, YN968, YN862, YN660, YN560 IV, YN560 III, YN720, YN685, YN685 II, YN320EX, YN650EX-RF, YN685EX-RF | |
| TAK | |
| 1/250 s (zależnie od aparatu) | |
| TAK | |
| NIE | |
| TAK | |
| USB-C | |
| NIE | |
| NIE | |
| Power supply | wbudowany akumulator 3.7V 350mAh |
| Dimmensions | 55x58x39mm |
| Weight | 68g |
Add your opinion >
No opinions - be first.
YN32-TX is a transmitter designed to work with Yongnuo receivers and lamps. The device allows you to control the lamps in five groups in M / Multi / TTL modes. In addition, YN32-TX supports synchronization in HSS mode and Gr management mode to help manage several groups of lamps at the same time. The transmitter is d... Czytaj więcej
